PRODUCTS
Sprintcut
Home » Products » CNC Wire Cut EDM » Sprintcut
Features :-
- 4 axes CNC
- Precision LM guideways for all axes
- Max. Cutting speed : 160mm2/min
- 0.25Ø special soft brass wire on 50 mm thick HCHCr (steel) workpiece)
- Best surface finish : 0.8 µ Ra
- Taper : ± 30°/ 50 mm
- e pluse technology
- Elcam - Powerful part programming software
- Table size - 440 X 650 mm
- Surface finish: 0.8 µ Ra.
- Complex profile cutting
- Auto job setting parameters
Click Here For More Details
Technical Specifications :-
| Machine Tool | |
| Design | Fixed column, moving table |
| Table size | 440 x 650 mm |
| Max.workpiece height | 200 mm |
| Max. workpiece weight | 500 kg |
| Main table traverse (X, Y) | 300, 400 mm |
| Auxiliary table traverse (u, v) | 80, 80 mm |
| Max. taper cutting angle | ± 30o/50 mm |
| Max. JOG speed | 900 mm / min |
| Max. wire spool capacity | 6 kg (upto DIN 160 / P5) |
| Wire electrode diameter | 0.25 mm (Standard) 0.15, 0.20 mm (Optional) |
| Generator | ELPULS-40 A DLX |
| Pulse peak voltage | 1 Step |
| CNC controller | EMT 100W-4 |
| Controlled axes | X Y, u, v simultaneous / independent |
| Interpolation | Linear & Circular |
| Least input increment | 0.0001mm |
| Least command input (X, Y, u, v) | 0.0005mm |
| Max. programmable dim | ± 99999.999 mm |
| Input Power supply | 3 phase, AC 415 V*, 50 Hz |
| Connected load | 10KVA |
| Average power consumption | 6 to 7 kVA |
| Dielectric Unit | DL 25 P | DL 35 M |
| Dielectric water | Deionised water | Deionised water |
| 2500 Litres | 250 Liters | 350 Liters |
| 10 µ Four Paper Cartridge | 10 µ Four Paper cartridges | Mineral bed |
| 1700 kCal. | 1700 kCal | 1700 kCal |
Note :- Supplied in India and specific countries only.
Home :: Company Profile :: Products :: Divisions :: Contact Us :: Sitemap :: Enquiry
© Copyright 2010. All Rights Reserved. Electronica Machine Tools Ltd.
Suppliers Directory - B2B Network of ExportersIndia.com