PRODUCTS
Small EDM (F 560 x 380 mm)
Home » Products » Small EDM » Small EDM (F 560 x 380 mm)
Features :-
- Very low power consumption
- Low electrode water
- Like - to - like machining
- MOSFET for superior finish
- Carbide cutting
- Optimum performance
Technical Specifications :-
| Machine Tool | F 560 x 380 |
| Work tank size (W x D x H) | 850 x 700 x 515 mm |
| Work table size | 560 x 380mm |
| T slots for fixing | 5 of 12 mm |
| Table movement | 320 x 250 mm |
| Least count of vernier | 0.005 mm |
| Max. job height | 400 mm |
| Back slide movement | 200 mm |
| Max. workpiece weight | 800 kg |
| Max. electrode weight | 50 kg |
| Servo system (Z axis) | DC Stepper |
| Quill travel | 150 mm |
| Machine tool size (W x D x H) | 1160 x 1660 x 2200mm |
| Dry weight | 1500kg |
| Daylight | 610 mm |
| Shut height | 260 mm |
| Throat | 390 mm |
| Generator | PRS 50 |
| Connected load | 4.5 KVA |
| Max. cutting current | 51+2 Amp |
| Supply voltage (5 wire system) | 3 phase, 415 V*, 50 Hz |
| MAX. MRR (Copper to OHNS steel) (Graphite to Steel) (Steel to Steel) | 320 mm3/min. 525 mm3/min. 155 mm3/min. |
| Best surface finish | 0.8 ยต Ra |
| Min. electrode wear (Copper to Steel) | 0.2% |
| Dielectric Unit | DU 50 |
| Dielectric capacity | 500 Litres |
| Filter element | 10 microns (2 Nos.) paper filter |
| Dielectric pump motor rating | 3 phase, 1.5 HP |
| Dielectric unit size (WXDXH) | 1075 X 1280 X 1075 mm |
| Dry weight | 220 kg |
Home :: Company Profile :: Products :: Divisions :: Contact Us :: Sitemap :: Enquiry
© Copyright 2010. All Rights Reserved. Electronica Machine Tools Ltd.
Suppliers Directory - B2B Network of ExportersIndia.com